Copyright © 2012- 2013 Kiranotics All rights reserved   Designed By - WEBNET INFOTECH
PRODUCTS
 
 
 
 
 
 
 
 
 
 
Inverter
 
 
Kiranotics Inverter is an electronic device which converts the D.C. power into A.C. power. It is a fully automatic, noiseless & pollution-free device. At the time of mains failure, it instantly starts, converting the battery power (D.C.) into the A.C. power and the load connected to this device automatically operates through the battery (12 V) / batteries (24 V). As soon as the main supply resumes, the connected load operating through the battery, automatically operates on the main supply within few mili-seconds & the batteries start getting charged.
 

Salient Features

  • Noiseless & pollution-free
  • Fast automatic changeover
  • Change in Output Voltage at D.C. mode is very less
  • Constant Output frequency with QC Sine wave
  • Very high efficiency than conventional power Inverters
  • Inbuilt Overload protection
  • Voltage & Current controlled charging using SCR
  • Auto transferring to trickle mode at full charging
  • Reverse Battery Protection
  • Battery deep discharge protection
  • Delayed sensing of mains supply to avoid chattering of changeover Relay
  • Inbuilt Spike suppression
  • Early indication of low battery and an alarm sounds seconds before the shut-down due to Low battery
  • Battery charging is normal at Mains Voltage (220 V +/- 30%).
  • Latest 50 KHz PWM technology with Mosfets
  • System By-pass Switch facility in cash of any failure
Technical Specifications
Input Voltage (Main)  : 50 Hz +/- 5 %
Input Voltage (Main)  charging : Same as Input frequency
Output voltage (Inverter mode)  : 220 V + / - 10 %
Output Frequency (Inverter Mode) : 50 Hz + / - 0.5 %
Output wave Form (Inverter Mode) : QC Sine Wave
Changeover Switch (Type & Time) : Automatic & 8-20 milliseconds

Battery Charging

 : Constant current & voltage (Charging current 7 Ampere approx. (adjustable inside)
Overload (Inverter Mode) : Electronic overload set on the basis of current
Capacity

: 300 Watts, 500 Watts & 1000 Watts

Battery Voltage for 1000 Watts : 12 Volts for 300 Watts and 500 Watts, 24 Volts
Efficiency            

: More than 90% (depending on the load)
Technology         : PWM & MOSFET based
     
Models Available

460 VA

760 VA

1350 VA